Multi-Disk type screw press S-RT type

Multi-Disk type Screw press consists of a Dewatering unit (this is composed of the Screw and the Filtering part) a Mixing/Concentrate Tank and a Body.
Filtering part which is accumulated with both moving and fixed rings. Those rings filter the sludge and separate it from the water. The filtered sludge is then moved and pressurized by the Rotating-Screw. The cake is discharged from the Cake Outlet and the filtered water is discharged by the force of gravity.

The sludge is entered into the upper side of the
Mixing Tank and mixed with the polymer by an
impeller. Inside the Tank, the water and the sludge
are separated, and they are injected into the Multi-
Disk type Screw press.

It is structurally safe and structurally very compact with low speed operation. You can certify the safety by certifying the CE standard.
High dehydration water content and low power consumption compared to the installation area.
It is suitable for all sludge treatment such as sewage, wastewater and sewage.

 LAPUTA-Snake Standard Specification

Depending on concentration and type of the sludge, the overall throughput and the specification of motor can be changed.