Multi-Disk type screw press S-ST type

Multi-Disk type Screw press consists of a Dewatering unit (this is composed of the Screw and the Filtering part) aMixing/Concentrate Tank and a Body.
Filtering part which is accumulated with both moving and fixed rings. Those rings filter the sludge and separate itfrom the water. The filtered sludge is then moved and pressurized by the Rotating-Screw. The cake is discharged from the Cake Outlet and the filtered water is discharged by the force of gravity.

The sludge is entered into the bottom of the Thickener and mixed with the polymer by an impeller. Inside this Thickener, the water and the sludge are separated. The separated water is discharged through a device that excludes water. By repeating this process, sludge is continuously concentrated. Finally, the concentrated sludge is injected into the Multi-Disk type Screw press.

It is structurally safe and structurally very compact with low speed operation. And we can certify the stability by CE certification.
High dehydration water content and low power consumption compared to the installation area.
It is suitable for all sludge treatment such as sewage, wastewater and sewage.

 LAPUTA-Snake Standard Specification

Depending on concentration and type of the sludge, the overall throughput and the specification of motor can be changed.